Inductive sensor
- Suitable for industrial, mobile, cooling and lubricating applications
- High protection rating for the requirements of harsh industrial environments
- Flexible use thanks to large operating temperature range
- Safe detection due to large sensing range and low sensor tolerances
- Reduced storage due to wide range of applications
Inductive sensor with IO-Link
- Setting options PNP/NPN or NO/NC help to reduce storage costs
- Long life and robustness thanks to flush installation and a high temperature range
- Particularly compact housing for use where space is restricted
- Continuous position feedback via IO-Link
- Switch points can be easily adapted via IO-Link at any time
Fail-safe inductive sensor
- Electrical design: PNP
- Output function: 2 x OSSD (A1 and A2)
- Enable zone [mm]; > 14.5
- Housing; threaded type
- Dimensions [mm]: M30 x 1.5 / L = 65
NX701
One machine control through one connection and one software is how we define the Sysmac automation platform. The Machine Automation Controller integrates logic, motion, safety, robotics, vision, information, visualization and networking under one software: Sysmac Studio.
This one software provides a true Integrated Development Environment (IDE). The machine controller comes standard with built-in EtherCAT and EtherNet/IP. The two networks with one connection purpose is the perfect match between fast real time machine control and data plant management.
Inductive proximity switch
- mounting type: flush
- special type: enhanced distance (GammaProx)
- nominal sensing distance Sn: 3 mm
- temperature drift: ± 10 %
- hysteresis: 3 ... 20 % of Sr
- output indicator: LED red
- correction factor type: mild steel 100 %, stainless steel 65 %,
- aluminum: 30 %
All controllers
- Various units certified for functional safety
- Multifunctional configurable input and output channels
- Powerful interfaces for various communication tasks
- E1 type approval by the Kraftfahrt-Bundesamt (German Federal Motor Transport Authority)
- Programmable to IEC 61131-3 with CODESYS
Accelerometers
- For connection to the VSE diagnostic electronics
- Wide frequency and measuring ranges
- Robust housing for use in harsh industrial environments
- Use in hazardous areas
SmartPLC
- Easiest wiring of inputs/outputs by means of AS-i perfectly complements all fieldbuses
- High-performance gateways, if required also with PLC functionality
- Full graphic colour display and integrated webserver for user-friendly configuration and diagnostics
- Quick and easy set-up
24 V DC power supplies
- Particularly space-saving design
- Low heating of the control cabinet
- High power reserves
- Safe switch-off by circuit breakers in case of short circuit
- Low inrush current
IO-Link - Displays
- For displaying up to four process values
- Easy integration into each IO-Link structure
- Colour change for text and background
- Flexible adaptation of the display, also during operation
- With text displays and dialogue box for free text
Color sensors
Color sensors detect the color of a surface. The sensors cast light (red, green, and blue LEDs) on the objects to be tested, calculate the chromaticity coordinates from the reflected radiation and compare them with previously stored reference colors. If the color values are within the set tolerance range, a switching output is activated.
Array sensors
LoremArray sensors operate on the proximity scanning principle. They detect even the smallest edges based on differences in grayscale values within the field-of-view. Positioning of, for example, a paper web based on the web edge or a contrast line is only one of many possible applications. Widths, diameters, and gaps can also be detected. In reflector mode, the array sensors can even detect transparent materials.
MultiTask photoelectric sensors
- Device type: Photoelectric sensors
- Sensor/ detection principle: Photoelectric proximity sensor, Background suppression
- Dimensions (W x H x D): 20 mm x 49.6 mm x 44.2 mm
- Housing design (light emission): Rectangular
- Sensing range max.: 50 mm ... 1,800 mm
- Sensing range: 100 mm ... 1,800 mm
- Distance value: Measuring range 50 mm ... 1,800 mm
- Resolution: 1 mm
- Accuracy: Type ± 15 mm
- Type of light: Visible red light
- Light source: Laser
- Light spot size (distance) Ø 12 mm (1,800 mm)
- Wave length 658 nm
- Laser class 1 (IEC 60825-1 / CDRH 21 CFR 1040.10 & 1040.11)
- Adjustment: Single teach-in button (2 x) IO-Link
Laser surface motion sensors SPEETEC 1D
- Opens up new possibilities for measuring sensitive, soft or smooth objects
- Optical sensors avoid damage to, and contamination of the surfaces being measured and ensure a high product quality
- Slip-free measurement increases the measurement accuracy thereby optimizing productivity and process quality
- Thanks to the use of class 1 lasers, no expensive laser protection measures and no specially trained personnel are required
- High measurement accuracy, including in start-stop operation and at short measurement lengths
- Configuration interface allows application and sensor diagnostics as well as parameterization
- Easy to retrofit, wear and maintenance free
Fork sensors
- Fast response time and fine resolution ensure reliable detection even at very high object speeds
- Infrared light source provides excellent ambient light immunity
- User-friendly setting via IO-Link, teach-in button, or plus/minus buttons
- A wide range of different fork sizes enables flexible installation
- Stable aluminum housing for use in harsh industrial environments
- Thanks to IO-Link or external teach-in, the switching threshold can be adapted while the process is running, increasing process reliability
- Easy to access data from the PLC via IO-Link
Safety Limit Switches
For critical safety applications, switches include key-operated interlocks, cable-pulls, hinge-mounts, limits, & non-contacting options.
Magnetic Sensors
Hall-effect or anisotropic magnetoresistive (AMR) sensor ICs in digital or linear outputs for angle, position & speed sensing; value-added packages.